-
Unknown Or Other
05/22/2026
My ignition key gets stuck when I shifted into park on my 2012 subaru impreza.
-
Electrical System
06/01/2025
The fan controls in the center of the dash failed. Fan speed 1&2 work, but 3&4 do not. After pulling the center dash controls out, I found that the plug connecting the fan speed controls to the wiring harness was burnt. This is a concern cause it could have burned other components or caused a fire.
-
Electrical System, unknown Or Other
07/01/2023
HVAC plug pigtail Blower motor resistor Heater control harness Is available for inspection HVAC electrical plugin was badly burned and melted causing risk of fire Summer months created dangerous interior temperatures Winter months & inclement weather created physical distress- & created dangerous vision restrictions/blockage because unable to use defroster Dangerous cab temperatures, limited or blocked vision through windshield created physical distress and distraction for me thus others and property were at elevated risk Yes confirmed by garage. No inspection performed. No warnings available. There are 2 separate incidents: July 2023/august 2023 September 2024/april 2025
-
Suspension, service Brakes, Hydraulic
03/12/2025
The contact owns a 2012 Subaru Impreza. The contact stated while driving at an undisclosed speed, the brake pedal was depressed and went to the floorboard. The vehicle failed to stop immediately. The brake warning light was illuminated. The vehicle was taken to an independent mechanic, who determined that the control arms and brake lines were severely corroded and needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 14V311000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall. The manufacturer was made aware of the failure but informed the contact that there was no recall associated with the VIN. The failure mileage was approximately 126,000.
-
Steering, electrical System, service Brakes
01/31/2025
The contact owns a 2012 Subaru Impreza. The contact stated that while driving approximately 30-40 MPH, the vehicle lost power steering functionality and was driven with manual steering. The failure occurred while driving at various speeds. The contact stated that approximately four days after the first failure, the steering wheel failed to move. Additionally, the vehicle was losing oil and one quart of oil had to be added every month. The contact stated that the power steering, ABS, TPMS, transmission automatic transmission fluid (ATF), and 4-WD failure warning lights were illuminated. The passenger occupant sensor chimed for the passenger to secure the seat belt consistently even though the occupant was seated with the seat belt buckled securely. The contact who is a certified mechanic had replaced the rack and pinion. The contact noticed that the threads on the tie rods were close in proximately risking the chance of damaging the tie rods. The ABS module had been replaced. The contac...
