-
Suspension
09/27/2006
RIGHT REAR WHEEL BEARING REPLACED 63948, 67346, 84427 MILES. HAD TO GO ON THE INTERNET TO FIND OUT THAT IT IS A COMMON PROBLEM. SHORTLY AFTER BUYING THE CAR (NEW) THE ENGINE STARTED MAKING A NOISE LIKE SOMETHING RATTLING INSIDE OF IT. I TOOK IT TO THE DEALER AND THEY SAID IT WAS A COMMON PROBLEM AND THEY WOULD DO NOTHING ABOUT IT. THEY WOULD HAVE TO TAKE THE ENGINE APART, AND SINCE THE PROBLEM WASN'T DANGEROUS, THEY WOULDN'T FIX IT. VERY, VERY DISAPPOINTED IN SUBARU CUSTOMER SERVICE. *TR
-
Engine And Engine Cooling, exterior Lighting
01/20/2007
TURN SIGNAL DIMMER SWITCH. HEAD LIGHTS GO OUT IF TURN SIGNAL IS TOUCHED. FAILURE OF LIGHTS OPERATING WHILE DRIVING AT NIGHT FOR SECONDS UNTIL LIGHTS TURN BACK ON. NO CORRECTION MADE YET. WATER PUMP MAKING HIGH PITCH SOUND. FAILURE OF PUMP COULD CAUSE SEVERE ENGINE DAMAGE. NO CORRECTION MADE YET. *NM
-
Suspension
06/23/2006
DEFECTIVE WHEEL BEARINGS. REPLACED REAR-RIGHT IN 2002, REAR LEFT FEB 2004, BOTH REAR JUN 2006. *NM
-
Power Train
12/14/2005
I HAVE A 2000 SUBARU IMPREZA WAGON....I BOUGHT IT NOV 2004 TO USE IN MY BUSINESS. I BOUGHT IT MAINLY BECAUSE SUBARUS ARE RELIABLE, ECONOMICAL CARS...IT HAD 55,000 MILES ON IT...NOW IT HAS 75,000 MILES ON IT AND THE CLUTCH IS REALLY SLIPPING BADLY; NOT GOOD WHEN YOU NEED TO ACCELERATE QUICKLY INTO TRAFFIC. I KNOW PEOPLE WITH SUBARUS THAT DIDN'T HAVE TO REPLACE THE CLUTCH UNTIL ALMOST 200,000 MILES. I REALLY FEEL THERE IS SOMETHING DEFECTIVE WITH MY PARTICULAR CAR FOR IT TO BE SLIPPING SO BADLY AT SUCH LOW MILEAGE...IM THE SOLE DRIVER OF THE CAR AND I DO NOT RIDE THE CLUTCH....IT IS NOW DEC 14, 05 AND IT HAS BEEN SLIPPING FOR A COUPLE MONTHS NOW. IS THERE ANYTHING THE MANUFACTURER CAN DO TO HELP ME WITH THIS PROBLEM? I LOVE THE CAR BUT AM VERY DISSATISFIED WITH THIS PROBLEM. *JB
-
Vehicle Speed Control
11/23/2004
1. NOT AWARE OF EVENTS LEADING TO THIS DEFECT. DESIGN IS SENSITIVE TO SMALL ADJUSTMENTS AND NOT ROBUST. 2. THROTTLE CABLE DISLODGES FROM GROOVE ON THROTTLE BODY LEVER WHEN ACCELERATOR IS FULLY DEPRESSED, PREVENTING THROTTLE FROM RETURNING TO IDLE POSITION. THIS CONDITION CAUSES MOTOR TO ACCELERATE AT APROXIMATELY 1/3 TO 1/2 FULL THROTTLE. THIS ALMOST CAUSED SEVERAL ACCIDENTS DUE TO SURGEN OF POWER DURING BRAKING. . CABLE END WAS REPOSITIONED AND CABLE SLACK ADJUSTED FROM 10 MILIMETERS TO 2 MILIMETERS. THIS SEEMS TO HAVE PREVENTED RECURANCE. 4.SUGGESTED DESIGN MODIFICATIONS INCLUDE: A. INCREASE GOOVE DEPTH ON THROTTLE LEVER AN ADDITIONAL 6 MI;IMETERS TO LESSEN TENDANCY OF CABLE TO DISLODGE. B. CHANGE SHAPE OF CABLE END TO PREVENT SEVERE TWISTING OF CABLE. CYLINDRICAL END COULD BE CHANGED TO SPHERICAL SHAPE, ALLOWING CABLE TO RELAX AND FIND NATURAL POSITION. THROTTLE LEVER WOULD ALSO NEED TO BE RE-DESIGNE TO ACCEPT THIS NEW CABLE END. A SIMPLE DEALER KIT WITH NEW LEVER COULD BE COULD...
