-
Engine, fuel/propulsion System
04/02/2026
I am reporting a severe vehicle safety hazard and engine stalling incident on my 2013 Ford Focus caused by an un-remedied factory emissions safety defect (related to Ford Recall 26S40 / 18S32). Due to an incomplete factory software monitoring patch, the canister purge valve stuck open and allowed continuous, unchecked engine vacuum to pull straight out of the plastic fuel tank. This heavy vacuum physically collapsed and deformed the bottom of the plastic fuel tank inward by approximately 0.25 to 0.375 inches. This structural collapse compressed the internal fuel pump assembly and mechanical float arm, falsifying the dashboard fuel gauge and distance-to-empty calculations. On April 2nd, while driving on Interstate 95 at midnight, the vehicle displayed an inaccurate fuel level, ran completely dry, and suffered a sudden engine stall in high-speed traffic without warning. My family and I were trapped in a highly hazardous situation and were forced to physically push the disabled vehicle 3...
-
Electrical System, engine, fuel/propulsion System
04/02/2026
The evap canister purge valve has been a recurring problem for this vehicle. The canister was replaced in 2021, but continued having problems, as it pulled a vacuum on the fuel tank in upwards of 3/8 inch. (Documented by Murray Ford in 2023 and reassuredthere was no issue by them) the vehicle has displayed inaccurate fuel readings and caused our family to be disabled and then stranded in the night on highway 95. It put the safety of my family, and other motorists at risk The problem hasn't been duplicated because their "software fix" essentially ignored the problem altogether. There were no warnings. According to my vehicle it had at least 50 miles til empty. The fuel sending unit is displaying innacurqte fuel readings, and the fuel pump has displayed symptoms, characterized by surging, stalled when accelerating from a stop, and of course, completely shutting off, while on the highway. I've tried my best to trust and be patient with Ford and for them to do the right thing, but have be...
-
Fuel/propulsion System
05/20/2026
I had my purge valve replaced under 24N07 ford costumer satisfactory program and the faulty purge valve damaged my catalytic converter and caused my engine light to illuminate with P0420.
-
Unknown Or Other
05/18/2026
Transmission problems and my car is still under 100000 and it’s a 2013 ford focus
-
Unknown Or Other
05/14/2026
While driving home from work, I was attempting to accelerate my RPMs showed 4000. However, my speed did not match the car. He hesitated and was doing a lot of jerking after I got home turned off the car turned it back on my check engine light came on and it threw a code P07A5.
