-
Power Train, vehicle Speed Control, engine
09/01/2020
I HAVE A 2007 FORD EXPEDITION WILL START UP IN THE MORNING AND BE FINE UNTIL IT WARMS UP THEN IT WILL STALL OUT IN THE MIDDLE OF THE ROAD OR AT STOP SIGHS OR LIGHTS THESE MOTORS ARE KNOW TO HAVE PROBLEMS FROM FACTORY IT IS MY ONLY CAR I HAVE TO GO TO COLLEGE I NEED HELP RESOLVING THIS ISSUE
-
Engine
06/16/2020
CAR HAS ALWAYS BUCKED AND TRUCK AND TRIED TO CATCH UP TO IT SELF. NOW I HAVE A TICKING SOUND COMING FROM UNDER MY HOOD. TICKING STAYS THE SAME RUNNING LOW RPM OR AT A HIGHER RPM.
-
Service Brakes
05/19/2018
FIRST INCIDENT OCCURRED WHEN VEHICLE WAS TRAVELING 45 MPH. BRAKES WERE APPLIED TO SLOW DOWN BEFORE A CURVE. AT THE POINT THE FRONT WHEELS LOCKED UP AND THE VEHICLE BEGAN TO ROCK BACK AND FORTH AND SWERVE ON THE ROADWAY. TO PREVENT A ROLLOVER THE VEHICLE WAS STEERED OFF THE ROAD WHEN IT JUMPED AN EMBANKMENT AND PLOWED THROUGH 25 FEET MUD AND BRUSH BEFORE COMING TO A COMPLETE STOP. THE BRAKES WERE COMPLETELY INOPERABLE. THE VEHICLE WAS SHUT OFF AND LEFT UNTIL IT COULD BE TOWED OUT. AFTER A FEW HOURS THE CALIPERS RELEASED. THE SECOND INCIDENT OCCURRED WHEN VEHICLE WAS STOPPED AT A STOP SIGN. WHEN ACCELERATED WAS PRESSED THE FRONT WHEELS WERE LOCKED UP AND THE BACK WHEELS WERE SPINNING. VEHICLE WAS PUT IN PARK, SHUT OFF, RESTARTED AFTER A FEW MINUTES AND CALIPERS WERE STILL LOCKED UP. VEHICLE WAS TOWED HOME AND CALIPERS RELEASED AFTER A FEW HOURS. CAR HAD ONLY BEEN RUNNING FOR ABOUT 30 MINUTES WHEN THIS HAPPENED. AFTER DIAGNOSIS IT WAS DETERMINED THAT THE BRACKETS THAT HOLD THE BRAKE...
-
Seats
12/04/2018
SEAT ROCKS BACK AND FORTH (FRONT AND BACK) WHEN ACCELERATING AND STOPPING. ADJUSTING SEAT DOES NOT HELP, ROCKS ON THE TRACK UP AND DOWN. CAN ROCK SEAT WHEN VEHICLE IS STATIONARY ALSO.
-
Engine
11/09/2019
DELEVOPED A TICKING NOISE TIMING CHAINS WERE REPLACED ALL ROCKERS AND LIFTERS ARE IN GOOD SHAPE THE TRUCK LOOSES POWER IT STARTS UP ROUGH AT ABOUT 1800 RPM YOU CAN HEAR THE TICKING LOUD PAST 2000 RPM THE TICKING GOES AWAY I HAVE RECENTLY BEEN NOTIFIED THAT THESE ENGINES HAVE CAM PHASER PROBLEMS IT RECENTLY DEVELOPED A P0022 CODE WHICH IS INT CAM POSITION TIMING OVER RET BANK 2 I HAVE REPLACED THE VVT SELONOIDS AND STILL HAS THE SAME PROBLEM VEHICLE LOST POWER ON HIGHWAY SPEED DROPPED FROM 70 AND WOULD NOT GO PAST 30 VERY UNSAFE INCEDENT ON THE INTERSTATE
