-
Power Train, electrical System, engine
12/23/2021
Unknown about what causes the issue but was Told it was manufacturers fault not mine. Insurance adjuster came out as well and said that my full coverage won’t cover anything at this point and told me as well to go contact the manufacturers to see what the option are available
-
Structure
01/17/2022
The contact owns a 2007 Ford Expedition Max. The contact was at a state inspection station and the vehicle was failed due to rust holes on the passenger’s side front subframe behind the front suspension, directly under a reinforcement plate. The contact stated that the entire reinforcement plate and the frame rail behind the plate had rusted through rendering the vehicle unsafe. The contact stated no warning light was illuminated. The contact took the vehicle to an independent mechanic, where it was diagnosed and the rusted frame section was replaced. The manufacturer had not been informed of the failure. The failure mileage was approximately 238,000.
-
Unknown Or Other
12/17/2020
ALWAYS WHEN VEHICLE IS IN LOWER GEAR, WITH RPMS BETWEEN 1-2, THE VEHICLE WILL SUDDENLY BEGIN TO VIBRATE/SHAKE AND FEELS LIKE YOU'RE RIDING OFF THE ROAD ON AN INTERSTATE (LIKE THE SPEED RIDGES IN THE PULL-OFF LANE. IT IDLES GREAT, SEEMS TO CHANGE GEARS SMOOTHLY (AUTOMATIC). SOMETIMES THE VIBRATION IS MINIMAL BUT OTHER TIMES IT'S QUITE NOTICABLE, BUT USUALLY LASTS LESS THAN 15 SECONDS. IF THE RPMS ARE OVER 1.5 IT ONLY DOES IT LESS THAN 5 SECONDS. I WONDERED IF IT IS FAULTY MOTOR MOUNTS OR TRANSMISSION MOUNTS? I'VE HAD TIRES ROTATED, BOUGHT A NEW SET OF TIRES, SHOCKS ARE FINE. I'VE TRIED EVERYTHING.
-
Engine
02/10/2021
I HAVE TO REPLACE SPARK PLUGS EVERY WEEK. THE ENGINE EITHER KEEPS MAKING THE PLUGS FOUL OUT, OR IT BURNS THE TIP RIGHT OFF THE ENGINE. I'M STARTING TO SEE FROM THE COMPLAINTS THIS IS A COMMON ISSUE. I DON'T FEEL SAFE DRIVING THE VEHICLE WITH MY 6 KIDS BECAUSE OF HOW BAD IT KEEPS MISSING AND TRYING TO DIE. I CHANGE PLUGS THEN DRIVES WELL FOR ABOUT A WEEK.
-
Engine
07/09/2020
ENGINE STARTED MAKING NOISE. PULLED IT A PART AND FOUND THE COMMON 5.4 LITER PROBLEM. THE CAM LOBS WAS EATEN UP ROLLER HAD FROZEN UP AND EATEN CAM UP AND TAPET HAS WENT BAD ALSO. VECH WAS IN USE WHEN THIS STARTED.
