1991 Dodge Dynasty Complaints

I SMELLED A STRONG ORDER OF GAS WHEN DRIVING, WHEN I CHECKED UNDER THE HOOD THERE WAS A CONSTANT DRIPPING FRO THE FUEL RAIL SUPPLYING THE FUEL INJECTORS...FIRST , IT WAS A SMALL DRIPPING ON THE FRONT VALVE COVER AND AFTER 2-3 MONTHS ITS A STRONG CONTINUOUS DRIPPING FILLING UP THE VALVE COVER SPILLING INTO THE MANIFOLD AREA. I HAVE RESTRICTED DRIVING MY CAR TO 5-7 MILES AT A TIME TO PREVENT POSSIBLE FIRES. MY MECHANIC CALLED THE DEALERSHIP TO SEE HOW MUCH THEY COST AND THIS U-SHAPED ALUMINUM TUBING ABOUT 14" LONG ,8" CONNECTING TUBE WHERE IT IS LEAKING FROM TO ANOTHER PIECE OF ALUMINUM 14" TUBING THAT GOES UNDERNEATH THE MANIFOLD IS $300.00 AND $150 TO INSTALL IT. I THINK IT IS A FACTORY DEFECT THAT THE MANUFACTURING DEALER IS GOUGING ALMOST PUNISHING THEM FOR NEEDING THE PART BY CHARGING 3XS WHAT THE PIPING/TUBING REALLY SHOULD COST. MY MECHANIC AND I HAVE BEEN ALL OVER THE WEB LOOKING FOR THE SAME PART BUT ALL OF THEM SAY ITS A DISCONTINUED PARTS AND CAN ONLY BE BOUGHT BY THE DEALER...

ABS ANTI-LOCK SYSTEM WARNING LIGHT GOES ON AT TIMES, THEN OFF OTHER TIMES. FOLLOWED BY ABS ANTI-LOCK SYSTEM FUNCTIONS TO FAIL TOTALLY REDUCED BRAKES TO STOP VEHICLE BY 95% USED PARKING BRAKE TO ACHIEVE STOP. *TR

LEAKAGE OF FUEL AT THE FUEL RAIL CONNECTIONS, ABOVE THE VALVE COVERS, WHICH DRAINS ONTO THE MANIFOLD AND COULD START A FIRE. I AM TOLD IT WILL COST OVER $700 TO REPLACE THE PARTS WHICH CANNOT BE BOUGHT ANYWHERE ELSE. *TR

PURCHASED SAID VEHICLE IN SEPT. 2006 USED. WAS JUST DRIVING AT POSTED SPEED LIMITS IN A COMMUNITY AREA OF PHOENIX, WHEN ALL OF A SUDDEN A LOUD CLACKING NOISE STARTED AS I PULLED UP TO MY DESIGNATION, SO I TURNED OFF THE MOTOR, LIFTED THE HOOD AND IMMEDIATELY NOTICED THAT THE TENSION PULLEY HAD NEARLY COMPLETELY CAME OFF THE MOTOR. IT DID CAUSE THE SERPINTINE BELT TO COME OFF OF ALL THE PULLIES OF THE MOTOR. I HAD TO HAVE THE VEHICLE TOWED HOME, AGAIN FOR THE SECOND TIME SINCE SEPT. 2006. HEN THE VEHICLE WAS AT MY HOME I FINISHED REMOVING THE PULLEY THAT WAS LOOSE, CAUSING IT TO BENT ENOUGH TO THROW IT TOTALLY OFF OF ITS TENSION PURPOSE. UPON REMOVAL A BOLT WAS ALSO BROKEN WHICH MAY HAVE CAUSED THE TOTAL PROBLEM BECAUSE IT WAS NOT TIGHTENED TO TORQUE SPECS. HAD TO REPLACE BOTH PARTS ATTACHED TO THIS PULLEY.*AK

FOR THE THIRD TIME WITHIN A 3 YEAR PERIOD MY CAR WILL START AND RUN FOR ABOUT 2 SECONDS AND TURN OFF, I HAD IT TOWED AND THE MECHANICS WOULD REPLACED THE MAIN COMPUTER, OR SAY THEY DID, AND CHARGE ME A GREAT DEAL OF MONEY. I SEARCHED RECENTLY ON THE INTERNET TO SEE IF OTHERS HAVE HAD THE SAME PROBLEM, AND I FOUND THAT IT IS A DEFECTIVE PART PROBLEM FOUND AT THIS SITE---HTTP://AUTOREPAIR.ABOUT.COM/LIBRARY/A/1F/BL111F.HTM I SHOULD NOT HAVE TO PAY FOR A DEFECTIVE PART WHICH IS TIED IN TO AN ANTI THEFT FEATURE. *JB