2019 Mazda CX-9 Complaints

1. What component or system failed or malfunctioned, and is it available for inspection upon request? ANSWER: Engine failure due to overheating. 2. safety & indicators: ANSWER: During evening rush hour traffic on a 3 lane highway my car went into a form of engine power saving mode while i had children in the vehicle; this was almost catastrophic form my family and the other vehicles around me. there was NO warning. there were no previous issues with my vehicle, this was unexpected. 3. technician review: this is a known issue with no warning: The technician inspected your vehicle and found a concerning issue with the engine overheating. They scanned the vehicle and found a trouble code P111A, indicating the engine coolant reached a temperature of 251.6 degrees Fahrenheit, forcing the engine into limp mode. Based on their experience, the technician believes the engine likely reached much higher temperatures, potentially causing internal damage to the engine block. After a thorough in...

I am reporting a serious safety issue involving a defective suspension part (lower control arm) manufactured by Dorman and purchased from an online auto parts retailer. On October 7, 2024, I ordered a Dorman lower control arm for my vehicle and had it professionally installed on November 7, 2024 at Johnston and Magwood Wheels & Tires. On November 8, 2024, at approximately 5:40 p.m., while I was driving and made a hard brake, I suddenly lost steering control and my front left wheel collapsed. Fortunately, I was the only one in the car and managed to avoid an accident. My vehicle had to be towed to a nearby shop (Kal Tire) and was later sent back to the original shop for further inspection. On November 12, technicians confirmed that the newly installed lower control arm had failed, which caused serious damage to the suspension. I paid $1,774.10 in repairs in order to make the car safe to drive again. This is extremely dangerous — if I had been driving on a highway or with passengers,...

While driving on highway I get a message on my dashboard "High Engine Temperature/Engine Output may be limited" warning message. I pullover and see that the cooland is low. I wait for thee car to cool down and fill with coolant. After 5 minutes of driving, get the same message on dash. I had car towed to Martin Mazda in Delaware. Diagnosis is that I need a new EGR valve and new engine $13,000. How coincidental it has the same symptoms as described in TSB and manifests itself differently and not covered? I even had my vehicle towed to John Kennedy Mazda in Pennsylvania and diagnosis is coolant is leaking into my engine. Too much of a coincidence and I am not the only Mazda owner experiencing this. My car is part of the VIN for the Mazda Powertrain Warranty Extension Technical Service Bulletin 01-002/23 (Feb. 10, 2023). The Mazda Techs are trained to not diagnose as such not to be covered under the warranty due to the enormous economic strain it will put on Mazda corporation. Mazda gets...

Vehicle jumps while driving. And sometimes stalls.

Failed water pump, blown head gasket, major coolant leak, and warped head causing the vehicle to overheat and die when coming to a stop. Vehicle died when stopped in construction on a highway and we were nearly rear-ended. Vehicle never showed check engine light and temperature gauge never showed that vehicle was overheating but significant damage was caused to the engine from “excessive temperatures.” Failure of warning signals allowed us to continue driving the car with a significant engine issue. Now the entire engine needs replaced at only 83,000 miles. Car was diagnosed by licensed independent repair shop. Additionally, front struts went out at approximately 40,000 miles making the car wobble at higher speeds. Was inspected and replaced by dealership.