2021 Mazda CX-30 Complaints

The climate control system suffered a sudden, complete failure due to an engineering defect documented in Mazda Technical Service Bulletin (TSB) ID: MC-10203760-0001. The factory evaporator core leaked refrigerant rapidly starving the A/C compressor of essential lubricating oil. This caused the compressor to overheat and complete seize. This failure occurred during extreme summer heat exceeding 100 degrees Fahrenheit, creating an immediate health hazard inside the cabin during my daily 40-mile highway work commute. Additionally, the complete loss of climate control functionality compromises the vehicle's defogging and defrosting capabilities, creating a severe visibility hazard during sudden weather changes on the highway. Mazda customer service corporate teams refused to cover or reimburse the repair because I had to utilize an independent repair facility (Firestone) within walking distance of my home to safely remedy the immediate environmental hazard. The manufacturer is actively de...

Excessive oil consumption. Regularly have a low oil warning come up about 6000 kms after an oil change. Oil is always low when checked.

The vehicle experienced a premature internal A/C failure, resulting in a total loss of climate control refrigerant. Because the A/C system failed, the vehicle's windshield defroster completely stopped removing humidity and moisture from the cabin air. This caused the front windshield to instantly and severely fog over while operating the vehicle completely obstructing forward driver visibility. The manufacturer has issued Technical Service Bulletin (TSB) MC-10203760-0001 for factory evaporator defect on 2021 models, acknowledging low refrigerant charge due to component leakage. However, the manufacturer's current TSB VIN cutoff is too narrow. My vehicle is a 2021 model built at the same facility experiencing the exact same component failure past the arbitrary cutoff, proving the dangerous defect extends into later production runs. The current parameters must be expanded to protect public safety and a recall needs to be initiated to fix the issue.

On June 3rd, 2026, about 1:15 PM, I braked in the rain because there was a stopped car in front of me. The brakes did not work; the Automatic Emergency brakes did not work; the Forward Collision Warning did not work and I hit the car in front of me causing a 3 car accident. As I hit the car I saw the Forward Collision Warning come on and then go out. Unfortunately, the brakes worked after that and the Mazda Collision Center cannot find anything wrong with the brakes. I note that the 2022 and 2023 models of the same car did have recalls related to the brakes. The claim is still open and I have not yet received the final damage report. Yesterday I was told the revised estimate is $16,000 and my car and the middle care with front and rear and damage are considered totaled.

Following a recent inspection at Perry Mazda in Santa Barbara, my vehicle was diagnosed with a failed clock spring mechanism causing airbag malfunction warnings. Clock spring failure under 70K miles on a 2021 vehicle is premature and suggests a defect rather than normal wear. I contacted Mazda North America and it has been over a week without a response. I have maintained the vehicle responsible and have no history of collisions or modifications that could have contributed to this failure.