-
Vehicle Speed Control accelerator Pedal
05/10/2009
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.
-
Engine And Engine Cooling
16/01/2009
TOYOTA IS RECALLING 214,570 MY 2006-2008 LEXUS IS, MY 2006-2007 GS AND MY 2007-2008 LS PASSENGER VEHICLES EQUIPPED WITH ALUMINUM FUEL DELIVERY PIPES (FUEL RAILS). ETHANOL FUELS WITH A LOW MOISTURE CONTENT WILL CORRODE THE INTERNAL SURFACE OF THE FUEL RAILS. AS THIS CONDITION PROGRESSES, THE ENGINE MALFUNCTION INDICATOR LIGHT MAY ILLUMINATE.
-
Seat Belts front
13/04/2006
ON CERTAIN PASSENGER VEHICLES, IF THE FRONT SEAT BELT RETRACTORS (BOTH DRIVER AND FRONT PASSENGER) BECOME LOCKED, THEY MAY NOT RELEASE DUE TO A COMPONENT OF THE EMERGENCY LOCKING SYSTEM. IF THE SEAT BELT IS LOCKED IN THIS CONDITION, THE OCCUPANT MAY NOT BE ABLE TO PROPERLY FASTEN THE SEAT BELT.
-
Service Brakes, Hydraulic foundation Components master Cylinder
21/10/2010
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2006 AVALON, MODEL YEAR 2004-2006 HIGHLANDER, MODEL YEAR 2004-2006 LEXUS RX, AND MODEL YEAR 2006 LEXUS GS AND IS VEHICLES. BRAKE FLUID CONTAINING POLYMERS IS USED THAT ACTS AS LUBRICANTS FOR CERTAIN BRAKE SYSTEM COMPONENTS. IF REPLACEMENT BRAKE FLUID IS USED THAT DOES NOT CONTAIN SUCH POLYMERS, OR THAT CONTAINS ONLY SMALL AMOUNTS, A PART OF THE RUBBER SEAL LOCATED AT THE REAR OF THE BRAKE MASTER CYLINDER MAY BECOME DRY, AND THE SEAL MAY CURL DURING MOVEMENT OF THE PISTON. IF THIS OCCURS, A SMALL AMOUNT OF BRAKE FLUID COULD SLOWLY LEAK FROM THE SEAL INTO THE BRAKE BOOSTER.
-
Fuel System, Gasoline delivery
26/01/2011
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 LEXUS IS AND MODEL YEAR 2006-2007 LEXUS GS VEHICLES. DUE TO INSUFFICIENT TIGHTENING OF THE FUEL PRESSURE SENSOR CONNECTED TO AN ENGINE FUEL DELIVERY PIPE WITH NICKEL PHOSPHORUS PLATING, THERE IS A POSSIBILITY THAT, OVER TIME, THE PRESSURE SENSOR COULD LOOSEN. IF LOOSENING OCCURS, FUEL COULD LEAK PAST A GASKET USED IN THE CONNECTION BETWEEN THE SENSOR AND THE PIPE AND THROUGH THE THREADED PORTION OF THE SENSOR.
