-
Steering, unknown Or Other
06/03/2023
UNKNOWN. Truck would not move out of gear as the gear shift was just moving up and down and not catching any gears
-
Power Train
01/19/2023
Stopped at a light and went to pull off when the light turned green and the car would not move at the speed of gas I was giving it coasted into the Intersection. I had to turn the car off in the middle of an intersection, restart it and shift back into drive as I got down the road it did the same thing I’ll be in drive and go to apply gas and seems as though the transmission slips causing unsafe driving.
-
Power Train, electrical System, engine
12/17/2022
The truck locks start locking and unlocking on their own, the stabilitrac and traction control will cycle between on and off, the motor will shut off, it goes to limp mode, check engine light comes on, traction control light comes on, abs light comes on, it has stalled in drive throughs on the interstate, driving around town, the vehicle is at pat clemons gmc in boone iowa, they replaced the bcm and it is still happening, there is an nhsta campaign #14V61400 for a chassis control module recall, this vehicle vin is not in that, but it does exhibit all the symptoms mentioned in the recall, very much a safety issue as it can happen anytime, especially when it is raining or snowing, started about a year ago
-
Service Brakes, engine, fuel/propulsion System
01/21/2020
I call this a "Panic breaking defect" I have experienced this on two different GMC vehicles manufactured 14 years apart. The first was a 1999 GMC suburban with mechanically operated throttle control. The second was my present GMC Yukon XL Denali with electronic throttle control. The defect: The close proximity of the accelerator pedal to the brake pedal makes it possible to have the right foot on both pedals at the same time. This results in high engine RPM and full breaking pressure, however, the anti-lock breaking system releases and re-applies the break pressure repeatedly allowing the vehicle to lunge forward a short distance on each cycle. To remove ones foot from the both pedals so as to apply it to just the break would result in the vehicle, engine being at high RPM, to allow the vehicle to speed forward resulting in a serious collision. True one could use the left foot, if able, on the break and then remove the right foot, allowing the engine to return to idle but on mod...
-
Steering, electrical System, engine
09/05/2022
Monday 5th 2022, (2pm)I was driving with the AC on high as I had just left the mall. The interior was hot. As I left the mall and came to a stop light...the car would rev at stop, and continue to do so until the light changed. I had the oil and transmission fluid changed at 135000. It is currently at 138000. I turned off the AC because it did not seem to work (to cool the car down) and rolled the windows down and open the sun roof. Tuesday 6th, I was leaving the store (4pm) and again I turned the AC on and approached a stop light. When I stopped at the light, the car started revving or idling in pulses again as it did on Monday, however as I went to turn right onto the street, there was no power steering at all. Startled, I pressed the brake, shifted into park, turned the SUV off. Then restarted the SUV and the steering had returned to normal. I kept the AC off and drove home.
