-
Fuel System, Other storage
04/03/2014
Landi Renzo USA is recalling certain model year 2011-2014 Ford E-150, E-250, and E-350 vehicles modified January 2, 2011, through February 24, 2014 to operate on compressed natural gas (CNG). In the affected vehicles, the left and right rear brackets that support the rear CNG cylinder may fail, allowing the cylinder to dislodge from the vehicle.
-
Equipment Adaptive/mobility
23/09/2014
National Van Builders, Inc. (National Van) is recalling certain 2007-2014 Ford E-150 and E-250 vehicles manufactured February 26, 2007, to August 19, 2014, and equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.
-
Equipment Adaptive/mobility
04/11/2015
MobilityWorks (WMK Inc.) is recalling certain model year 2006-2014 Ford E-150, E-250, and E-350 vans modified by MobilityWorks to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
-
Visibility windshield
26/08/2011
Ford Motor Company (Ford) is recalling certain model year 2011 Ford E-150, E-250, E-350, and E-450 vehicles built from May 12, 2011, through May 26, 2011. Due to improper manufacturing conditions, some of the windshields may form bubbles after an extended time in hot temperatures. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 205, "Glazing Materials."
-
Fuel System, Other delivery hoses, Lines/piping, And Fittings
10/07/2014
Roush Performance Products, Inc. (Roush) is recalling certain model year 2010-2012 Ford E-150 Wagons and Cargo Vans, E-250 Cargo Vans and Extended Cargo Vans, E-350 Wagons, Extended Wagons, Cargo Vans, and Extended Vans, and E-450 Cutaway models. These models were modified by Roush to be equipped with certain propane fuel system conversion kits manufactured January 2011 to August 2012 with an aluminum fuel line fitting. Due to a reaction between the different metals, the affected kits may develop a propane leak where the aluminum fuel line fitting contacts the brass supply valve housing.
