2017 Chrysler Pacifica Complaints

While driving, the vehicle unexpectedly shut off without warning. The engine stalled while the vehicle was in motion, causing an immediate loss of acceleration and power and creating a serious safety hazard in traffic. This vehicle previously received the Safety Recall U01 repair in January 2018, but the same engine stall condition has returned. The recall remedy does not appear to have permanently corrected the problem.

The vehicle exhibits an intermittent, completely silent sticking and binding sensation in the steering wheel during gradual turns at highway speeds (occurring across all speeds between 20–80 MPH). The binding defect triggers during both left and right-hand gradual turns, requiring the driver to apply sudden, manual physical force to break past a resistance "notch" point, which is followed by a sudden return of power steering assistance.The vehicle's electrical system has been thoroughly diagnosed and isolated: a brand-new auxiliary and main battery were installed, and secondary 12V accessories were completely disconnected, verifying the charging system maintains a perfect, steady 14.1 to 14.2 volts under load while the steering binding continues to occur. This rules out standard battery/alternator low-voltage failure.The vehicle was brought to a certified Chrysler dealership where a technician test-drove the minivan and explicitly witnessed, verified, and confirmed the bi-directional s...

While driving, the engine stalled and produced a cranking noise. Subsequently, the display screen turned black. Currently, I am experiencing a problem where I cannot turn off the vehicle or shift gears, rendering it immobilized. I have taken the vehicle to a Chrysler dealership, and they have been unable to identify any faults. However, I believe the vehicle is not safe to drive.

The contact owns a 2017 Chrysler Pacifica. The contact received notification of NTHSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the dealer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

Steering wheel sticking at 11 and 1 o clock position, has become very difficult to turn and feels like overcorrecting to keep vehicle in center of lane.