2011 Chevrolet Cruze Recalls

General Motors LLC (GM) is recalling certain model year 2016-2017 Buick Verano and 2016 Chevrolet Malibu as the electronic park lock lever may allow the ignition key to be removed without the transmission being in PARK. Also, certain 2013 Buick Encore, 2011 Buick Regal, 2013-2014 Buick Verano, 2011-2016 Chevrolet Cruze, 2010-2013 Chevrolet Equinox 2013-2015 Chevrolet Malibu, and 2011-2013 GMC Terrain vehicles may have been serviced with similar defective replacement electronic park lock levers. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection and Rollaway Prevention."

GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2011 CHEVROLET CRUZE VEHICLES MANUFACTURED FROM OCTOBER 6, 2009, THROUGH APRIL 27, 2011 AND EQUIPPED WITH AN AUTOMATIC TRANSMISSION FOR FAILING TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 102, 'TRANSMISSION SHIFT LEVER SEQUENCE, STARTER INTERLOCK, AND TRANSMISSION BRAKING EFFECT,' AND FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, 'THEFT PROTECTION.' THESE VEHICLES MAY HAVE BEEN BUILT WITH A TRANSMISSION SHIFT LINKAGE THAT IS NOT PROPERLY INSTALLED. IF THE LINKAGE IS NOT PROPERLY INSTALLED, THE PRNDL SHIFT LEVER MAY NOT ACCURATELY REFLECT THE POSITION OF THE TRANSMISSION GEAR. WITH THIS CONDITION, THE DRIVER COULD MOVE THE SHIFTER TO PARK AND REMOVE THE IGNITION KEY, BUT THE TRANSMISSION GEAR MAY NOT BE IN PARK.

GENERAL MOTORS (GM) IS RECALLING CERTAIN MODEL YEAR 2011 AND 2012 CHEVROLET CRUZE VEHICLES MANUFACTURED FROM OCTOBER 2, 2009, THROUGH MAY 14, 2012. ATTACHMENT WELDS FOR THE FUEL TANK STRAP SECONDARY BRACKETS MAY HAVE BEEN OMITTED.

GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2011 CHEVROLET CRUZE VEHICLES. DURING MANUFACTURING THE STEERING WHEEL COULD HAVE BEEN IMPROPERLY FASTENED AND MAY DETACH FROM THE STEERING COLUMN.

GENERAL MOTORS (GM) IS RECALLING CERTAIN MODEL YEAR 2011 AND 2012 CHEVROLET CRUZE VEHICLES MANUFACTURED FROM OCTOBER 2, 2009, THROUGH MAY 31, 2012. SPILLED OR DRIPPING OIL (SUCH AS AFTER AN OIL CHANGE) MAY COLLECT IN THE ENGINE SHIELD (BELLYPAN) NEAR HOT ENGINE OR EXHAUST SYSTEM SURFACES. AS A RESULT, THE OIL AND THE ENGINE SHIELD MAY IGNITE AND BURN.