1998 Bmw Z3 Complaints

The BMW E36 Z3 1996-2002 (I have the 1998 1.9) are prone to having a separation of the Rear subframe from the differential causing the drivetrain to hang off the vehicle and/or rip out of the trunk's weak aluminum sheet subframe. BMW Germany has acknowledged the problem for a few individuals over the past decade and a half and kept it on the low for them to not spread it further. BMW North America fails to acknowledge the design flaw during their manufacturing process in the North American Plant during the late 90s. The Spot Welds' quality is subpar and worrisome as this catastrophic failure of the subframe to driveline structure has various ways of presenting it self which chiefly includes popped spot welds in the truck which comes hand in hand with a cracked differential ear bracket. * To simply understand why this happens: The issue is that the metal of the trunkfloor is too thin and not adequete at holding up to the forces of the differential tugging at it. There have been docum...

SEATS MOVE FORWARD AND BACKWARD WHEN VEHICLE ACCELERATES OR DECELERATES, ITS A KNOWN ISSUE OF DEFECTIVE EQUIPMENT THAT SHOULD NOT FALL ON THE CONSUMER FOR REPAIR

I HAVE A 1998 Z3 M ROADSTER AND THE TRUNK WELDS HOLDING THE SUBFRAME IS FAILING. THIS IS A COMMONLY DOCUMENTED ISSUES. BMW DEALERS ACKNOWLEDGE THE ISSUE BUT BMW NORTH AMERICA WILL NOT FIX IT. THIS IS A WELDING/MANUFACTURING DEFECT THAT CAN LEAD TO THE DIFFERENTIAL AND SUSPENSION COMPONENTS IN THE REAR TO COMPLETELY SEPARATE.

I PURCHASED A USED 1998 BMW Z3 WITH THE 1.9 LITER ENGINE ON 10/14/2010 WITH 90564 MILES. IN MID NOVEMBER I TOOK THE CAR TO A MECHANIC FOR A CHECK ENGINE LIGHT WHICH WAS SERVICED. THE MECHANIC INFORMS ME THERE IS A PROBLEM WITH Z3'S ALONG WITH OTHER MODEL BMW'S WITH THE WAY THE REAR DIFFERENTIAL IS ATTACHED. THE PROBLEM SEEMS TO BE FLEXING IN THE SHEET METAL WHERE THE DIFFERENTIAL IS ATTACHED CAUSING FAILURE OF THE SPOT WELDS HOLDING THE WHOLE ASSEMBLY TOGETHER. HE SHOWED ME IN MY TRUNK WHERE TWO OF THE SIX SPOT WELDS HAD BROKEN. I HAVE RESEARCHED THIS ON THE DIFFERENT BMW FORUMS AND BMW IS CLAIMING THIS FAILURE IS DUE TO PERFORMANCE MODIFICATIONS OR CARS THAT HAVE BEEN TAKEN TO A TRACK OR AUTOCROSS. I DO NOT KNOW THE PREVIOUS HISTORY OF MY CAR BUT IT APPEARED TO HAVE BEEN TAKEN CARE OF. ON 6/30/2011 I HAD THE CAR IN THE SHOP AGAIN FOR SERVICE WORK AND MY MECHANIC FOUND TWO MORE BROKEN WELDS AND SOME SEPARATION IN THE REAR CHASSIS. THIS CAR IS PRETTY MUCH UN-DRIVABLE NOW DUE TO THIS...

TL*THE CONTACT OWNS A 1998 BMW Z3. DURING ACCELERATION AND DECELERATION THE FRONT PASSENGER AND DRIVER SEAT ADJUSTOR RAIL FAILED. AS A CONSEQUENCE, THE SEAT MOVED BACK AND FORTH WHILE THE CONTACT WAS DRIVING. THE VEHICLE WAS TAKEN TO THE DEALER FOR INSPECTION, BUT NO REPAIRS WERE MADE. THE FAILURE MILEAGE WAS 50,000. THE CURRENT MILEAGE WAS 65,000. UPDATED 11/09/09 *BF THE CONSUMER STATED BMW KNEW THERE WAS A PROBLEM AND THERFORE, THEY CHANGED MATERIAL USED IN THE ISOLATER PADS. UPDATED 11/09/09