-
Unknown Or Other
10/13/2022
Safety Recall for rear subframe rust was "performed" at local dealer. Quality of work was questioned in that safety recall indicated dealer would removed corrosion on said subframe and apply anti-corrosive wax. Dealer notes they applied some anti-corrosive wax and some undercoating to a small section but did not coat ALL corrosion areas they cleaned. I had area reviewed by independent repair shop who noted the area was a concern and should be coated in the near future to prevent further corrosion and damage to frame. After discussing this with the dealer service department they informed me that was my job and my expense and told me to "have a nice day" and hung up. Is this appropriate behavior for a safety related item that could result in a fuel tank detachment or fuel leak?
-
Service Brakes
12/31/2021
SINCE JANUARY I HAVE STEPPED ON THER BRAKE PEDAL AT LEASE 6 TIMES AND THE PEDAL HAS GONE ALMOST TO THE FLOOR. I RELEASE THE PEDAL AND IT CAME BACK UP TO THE ORIGINAL POSITION. THE DEALER DID BRAKE MAINTENANCE ON THE FRONT. SAID THE PADS WERE STICKING. RECOMENDED NEW PADS AND ROTORS. I OKAYED NEW PADS AND ROTORS BE DONE. THEY ALSO DID MAINTENANCE ONTHE REAR AXLE BRAKES. YESTERDAY THE BRAKE PEDAL WENT DOWN TO THE FLOOR 2 TIMES IN 5 MINUTES. THIS WAS ALL DONE AT THE DEALERSHIP. THIS MORNING I DROPPED THE 2014 HONDA RIDGELINE AT AN INDEPENDENT AUTO SHOP TO SEE IF THEY CAN SOLVE THIS PROBLEM.
-
Structure
09/08/2020
THE CLEAR COAT IS FAILING ON MY WHITE HONDA RIDGELINE.
-
Electrical System
06/01/2019
ELECTRICAL DOOR LOCK MECHANISM DOES NOT WORK USING THE KEY FOB LOCK.
-
Service Brakes
01/07/2018
WHILE DRIVING , APPLIED BRAKE AND PEDAL WENT TO THE FLOOR CAR WOULD NOT STOP! REPLACED BRAKE MASTER CYLINDER (TYPICAL REPAIR) THIS DID NOT FIX ISSUE. IM AM TOLD THE THE ABS MODULATOR CAUSED THIS FAILURE. THE MASTER CYLINDER IS UNDERSTANDABLY A DANGEROUS FAILURE POINT HOWEVER I HAVE NEVER HEARD OF AN ABS MODULATOR CAUSING THIS ISSUE WHICH CAN BE DEADLY . THE CAR ONLY HAS 90K MILES WHICH ALSO IS AN ISSUE AS THIS IS NOT A TYPICAL FAILURE. I WAS ABLE TO AVOID A COLLISION BUT IM WONDERING IF THIS SHOULD BE LOOKED INTO CLOSER AND IF THERE ARE OTHERS THAT HAVE HAD THIS PROBLEM BUT DID NOT RECOGNIZE THE FAILURE POINT SINCE THE PART IS NOT SUPPOSE TO FAIL IN THIS MANNER .
