2007 Honda Element Complaints

The left rear trailing arm mount is very rusty as is the inner rocker. This is a problem with both the CRV and Element ,it's a safety issue because the mount can detach and cause a accident. This vehicle has had a yearly inspection in my state and has passed I am concerned it won't in the future because of trailing arm rust. The element are built on the same platform as the CRV witch is being recalled for this problem. The elements are being recalled in Canada for this problem.

REAR SUSPENSION FAILURE DUE TO EXCESSIVE CHASSIS COROSION. FORTUNATELY FAILURE OCCURRED AT LOW SPEED. TOTAL LOSS OF CONTROL WOULD RESULT AT HIGH SPEED. INDEPENDENT BODY SHOPS CONFIRM THIS DEFECT IS NOT REAIRABLE. PLEASE NOTE THAT THERE IS A RECALL FOR HONDA ELEMENTS IN CANADA FOR THIS SAME DEFECT. I CALLED AMERICAN HONDA AND THEY DENY ANY KNOWLEDGE OF THIS DEFECT IN THE U.S.

Rear suspension failure due to excessive corrosion. Fortunately failure occurred at low speed. Total loss of control would have happened at high speed. Independent body shops confirm this damage is not repairable. Please note that there is a recall for Honda Elements in Canada for the same defect. I called American Honda and they deny any knowledge of this defect in the U.S.

The frame of the vehicle has rusted out at the bolt where the rear trailing arm connects to the frame. The rust has caused the vehicle to fail Maine State Inspection. This vehicle defect has led to a recall in Canada: “On certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear trailing arm separating from the vehicle. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador).” https://recallmonitor.ca/recall/2021024 Maine and New Hampshire, where this vehicle has been registered for its entire life, are areas of heavy road salt usage. According to Honda Canada, “ A rear trailing arm that separates could cause a loss of control and increase the risk of a crash.” The vehicle is available for inspection upon request. It was inspected by a garage certified to provide Maine State Inspections. The manufacturer...

While driving, without notice at all, the drivers side rear suspension ,wheel, and all the holds it together became dislocated/disassembled from the car while going about 40mph. Upon further investigation, I found the whole frame mount for the rear suspension had completely rotted away and caused this whole issue. NO PRIOR WARNING AT ALL!! This is a potentiality deadly issue.. I had just come off the highway doin 70 mph... if this would of happened there...it would of been a completely different outcome. The year/make/model of my vehicle has already been recalled for this issue.. BUT my vin # wasn't included?.?.?. THIS IS WRONG!! THIS IS A SERIOUS ISSUE THAT NO AMOUNT OF MAINTENANCE WILL STOP!!