1992 Dodge Stealth Complaints

I HAVE A 1992 DODGE STEALTH TWIN TURBO. BOTH FRONT SEAT BELTS ARE EXTREMELY LOOSE [IE. DO NOT PROVIDE ADEQUATE RETRACT TENSION]. THIS SEEMS TO BE A MAJOR SAFETY ISSUE IF ONE WERE TO BE INVOLVED IN A COLLISION! *JB

I HAVE EXPERIENCED TWO INCIDENTS OF STRIPPED SPLINES ON THE TRANSMISSION OUTPUT SHAFT [THAT GOES TO THE TRANSFER CASE]. THE BEVEL CUT GEAR IN THE TRANSFER CASE HAS ALSO STRIPPED IN BOTH INSTANCES. THIS HAS RESULTED IN CONSIDERABLE EXPENSE HAVING THE TRANSMISSION TORN DOWN TO REPLACE THE SHAFT [NOT TO MENTION RENTAL CAR NEEDED DURING THE REPAIR]. ONCE THE SHAFT SPLINES STRIP OUT - THE CAR WILL NOT MOVE AND PRESENTS A CLEAR AND PRESENT DANGER TO THE DRIVER WHO IS OUT ON THE ROAD! *NM

SEAT BELT DOES NOT RETRACT WHEN PULLED ON. NO ACCIDENT YET, BUT WITHOUT THE RETRACTION, WHAT GOOD IS THE SHOULDER PART OF THE SEAT BELT? *NM

MY SEAT BELTS WHEN YOU PULL ON THEM TO USE THEM AFTER THEY ARE PUT IN THE PLACE THAT LOCK THEM IN PLACE, THEY DON'T HOLD TO YOUR BODY AND IT CONCERNS ME GREATLY. AND SOME TIMES THEY SIT SO LOOSELY ON MY CHEST IT IS JUST IN THE WAY MORE THAN A RESTRAINT. *NM

OUTPUT SHAFT IN TRANSMISSION HAS BROKE TWICE, ONCE WHEN I BOUGHT THE CAR AND THE WHOLE TRANSMISSION WAS REPLACED, NO MORE THAN A FEW HUNDRED MILES LATER THE SHAFT SNAPPED AGAIN. THE SHOP THAT REPLACED EVERYTHING THE FIRST TIME STATED THAT THE SHAFT IS VERY WEAK UNDER PRESSURE. THE VEHICLE HAS BEEN BABIED AND TAKEN WELL CARE OF, NEVER DRIVEN VERY HARD, BUT A FEW TIMES OF TAKING OFF AND THE SHAFT HAS BROKEN ON ME 2 TIMES. THIS TIME, THE CAR HAS BEEN SITTING FOR MONTHS BECAUSE I CANT AFFORD TO BUY ANOTHER $4000 DOLLAR TRANSMISSION, WHICH WOULD PROBABLY BREAK AGAIN. ITS NOT MUCH CHEAPER TO INSTALL A PERFORMANCE OUTPUT SHAFT, WHICH COSTS AROUND $600 FOR THE SHAFT ALONE. *NM