2020 Bmw X3 Complaints

  • Engine 02/27/2026

    I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caus...

  • Power Train, engine, fuel/propulsion System 02/26/2026

    Oil pump failures have been reported across multiple production years, and affected vehicle population boundaries remain unclear. Because this condition can result in sudden vehicle disablement without adequate warning especially in the cold, I believe this issue warrants investigation as a potential safety-related defect. Loss of lubrication can cause the vehicle to become disabled without warning while driving or shortly after startup. This creates a safety hazard, particularly when vehicles become immobilized in active traffic or during winter conditions the cold is when they fail the most, where occupants may be exposed to freezing temperatures while awaiting assistance.

  • Engine 02/26/2026

    I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating oil pressure. Field failures are increasingly being reported in which this internal component fractures, resulting in sudden loss or instability of engine oil pressure. The failure frequently occurs during cold-start operation in low ambient temperatures. When the component fails, oil pressure regulation becomes erratic or is lost entirely. In many cases, drivers receive little or no actionable warning prior to engine damage or vehicle disablement. Reported precursor symptoms include inability to electronically measure engine oil level, abnormal oil pressure behavior, or sudden drivetrain malfunction warnings. Failures may rapidly progress to engine shutdown or severe mechanical damage caused...

  • Electrical System 11/24/2025

    The contact owns a 2020 BMW X3. The contact stated that several attempts were needed while cold-starting the vehicle. The contact stated that prior to receiving notification of NHTSA Campaign Number: 25V636000 (Electrical System); the battery was replaced; however, the vehicle was still difficult to start. The local dealer was contacted, and the contact was informed that the remedy was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the failure. The failure mileage was approximately 51,000.

  • Engine And Engine Cooling 02/24/2026

    The contact owns a 2020 BMW X3. The contact stated that while driving approximately 45 MPH, the vehicle began to shake with the message, "Pull Over Engine Oil Pressure Low Pull Over Stop Driving to Avoid Engine Failure". The contact immediately pulled over to the side of the road, inspected the vehicle, and became aware there was no issue with the oil. The vehicle was towed to a certified mechanic, who diagnosed the vehicle and determined that the oil pump was defective due to the oil pump being manufactured with plastic. The mechanic confirmed it was a known issue, and the oil pumps were changed to a metal material to avoid the failure. The dealer was contacted, and the new metal pump part, PN: 11418646454, was ordered. The vehicle was scheduled to be repaired. The manufacturer was informed of the failure and informed the contact that the vehicle was purchased at a dealer not associated with BMW, and the cost of the repair would not be covered. The failure mileage was approximately 60...

Previous Page

View Complaints for Other Bmw X3 Years